How to change a Micro Scooter wheel

How to change the wheel on your Micro Scooter

Difficulty: 3/5

You will need: A vice, 2x 5mm Allen Keys, thread lockable (reccomended)

Instructions

1. Fix the scooter facing upside down on a vice

2. Using the 2x 5mm Allen keys, insert them into the bolts either side of the wheel to undo the axel

3. Once the bolt is removed slide one Allen key from the opposite side of the wheel, through the hole to remove the axel completely

4. Remove the wheel from the scooter and make sure you catch the spacers from the wheel

5. If possible: Untighten the shanks

6. Get your new wheel and position the spacers and wheel on your scooter

7. Slot the axel back through the wheel into position.

8. Using your 2x 5mm Allen keys, insert the bolt and tighten it until it is secure

9. Retighten the shanks