How to attach the trailer to the G Bike

Everything you need to know about attaching the trailer to the G Bike.

You will need: A crosshead screwdriver

Instructions

1. Insert the black plate into the bottom of the frame, just in front of the back wheel as shown in the picture below. Using a crosshead screw driver, insert the screw until it is tight in place

How to attach the trailer to the G Bike - step 1

2. Attach the mud pad so that it sits above the back wheel, using the two clips. Slide the clip through the first black plate that has already been screwed in, and then slide the mud mad into the other side of the clips so that is slots securely into place. Once these part are in place, spin the wheel to make sure it is not catching on anything

How to attach the trailer to the G Bike - step 2

3. Flip the bike so that it is standing upright and slot the hole at the front of the trailer through the rod that is sticking up above the wheel. It should now be secure in place and you have attached the trailer to your G Bike

How to attach the trailer to the G Bike - step 3